Chromatography Columns and Cartridges
Waters Corp SunFire C18 Column, 100Å, 5 µm, 4.6 mm X 100 mm, 1/pk
SunFire C18 columns are used for general purpose method development at low pH. The C18 ligand is highly retentive, especially for basic compounds and it is ideally suited for purification and impurity profile assays.
YMC America, Inc JsphrH80 80A 4um 150x.3mm 1/32
The J sphere series of columns consists of three kinds of ODS made from the same silica gel base each with a different ligand coverage The 4 um 80 silica support provides outstanding chromatographic efficiency while the high surface area material (500 m2/g) offers exceptional interaction with analytes This combination provides excellent peak symmetry across all J sphere products The variations in ligand coverage produce three columns with different hydrophobicity hydrogen bonding capacity and steric selectivity for tertiary structures Because of this J sphere can be used with confidence to identify structural differences of solutes and to improve the efficiency of separation optimization
YMC America, Inc BioProSS Q20 20um 150x30mm
YMC s BioPro IEX resins are fully scalable exhibiting consistent chromatographic behavior across all particle sizes YMC-BioPro IEX SmartSep Q/S (10 20 or 30 um) which show high resolution and recovery even at a high flow rate and high loading condition are suitable for an intermediate purification step and a polishing step of mAbs proteins peptides and oligonucleotides
YMC America, Inc BioProSS Q30 30um 100x10mm
YMC s BioPro IEX resins are fully scalable exhibiting consistent chromatographic behavior across all particle sizes YMC-BioPro IEX SmartSep Q/S (10 20 or 30 um) which show high resolution and recovery even at a high flow rate and high loading condition are suitable for an intermediate purification step and a polishing step of mAbs proteins peptides and oligonucleotides
Mac-Mod ProntoSIL C18 H, 60 Å, 5 µm, 3.0 x 200 mm HPLC Column
ProntoSIL HPLC columns produce great results, while at the same time being an economical column. Columns are packed in 400 bar HPLC hardware. There are several RPLC, HILIC, NPLC and Application Specific Columns with over 25 different bonded phases which are sure to solve your separation issues.
YMC America, Inc TDH Actus 120A 5um 250x20mm
YMC-Triart phases are based on organic/inorganic hybrid particles that combine the high mechanical stability and efficiency of a silica-based packing material with the robust chemical stability of a polymer-based packing material This versatile resin is produced using tightly controlled particle formation technology adapted from micro-reactor technology The resulting uniform particle and pore size distributions as well as the smooth surface greatly contribute to excellent peak shape and separation reproducibility In addition YMC-Triart materials are highly resilient and robust when used at extreme pH elevated temperature and high pressure
YMC America, Inc JsphrL80 80A 4um 100x.3mm 1/16
The J sphere series of columns consists of three kinds of ODS made from the same silica gel base each with a different ligand coverage The 4 um 80 silica support provides outstanding chromatographic efficiency while the high surface area material (500 m2/g) offers exceptional interaction with analytes This combination provides excellent peak symmetry across all J sphere products The variations in ligand coverage produce three columns with different hydrophobicity hydrogen bonding capacity and steric selectivity for tertiary structures Because of this J sphere can be used with confidence to identify structural differences of solutes and to improve the efficiency of separation optimization
Waters Corporation SunFire C8 OBD Prep Column, 50 x 150 mm, 10 μm
The SunFire C8 OBD Prep Column is designed for preparative liquid chromatography, offering uniform and optimally packed column beds. This ensures excellent column lifetime and consistent performance, facilitating direct scalability from analytical to preparative applications. Its C8 chemistry provides less retentivity than a C18 column, making it suitable for strongly hydrophobic compounds.
- Helps bridge the performance gap in Prep LC with uniform, optimum packed bed density.
- Direct scalability from analytical to preparative chromatography.
- Excellent column lifetime and consistent column-to-column performance.
- Delivers good resolution, peak shape, and mass loading for preparative chromatography results.
- Shorter C8 alkyl chain provides less retentivity than a typical C18, suitable for strongly hydrophobic compounds.
Mac-Mod Princeton Pyridine Amide 60 Å, 10 µm, 21.2 x 250 mm SFC Column
Princeton Chromatography Achiral SFC columns are designed and manufactured in the US, well known for innovating novel and robust workhorse phase chemistries, for the analysis of achiral SFC applications. Princeton designs myriad phase chemistries to improve the selectivity and efficiency of SFC analysis. Known for originally innovating the 2-EP phase chemistry, explore what Princeton has to offer. Columns are available from analytical to preparative sizes and are available in a wide range of pore sizes, particle sizes, column ID's and lengths. If you do not see something that you want, please just ask!
YMC America, Inc C8-HG col 200A 20um 500x30mm
YMC-Pack C8 columns are prepared using exhaustive bonding of a monomeric octylsilane to totally porous and spherical silica gels The functionalized silica is then treated with an endcapping process which produces a moderate 10% carbon loading on the standard 120 pore material Available in three pore sizes YMC-Pack C8 columns will separate many classes of compounds including pharmaceuticals organic chemicals and biologics
Waters Corp Waters iKey CSH C18 Separation Device, 1.7 μm, 150 μm × 50 mm
The iKey Separation device is one of the enabling technologies behind the ionKey/MS system. This innovative device eliminates the need for traditional fittings and significantly simplifies the microflow-LC user experience. It is available with an internal diameter of 150 μm and in lengths of 50 mm and 100 mm, making microflow LC accessible to a wider range of chromatographic laboratories.
- C18 chemistry
- Reversed phase separation mode
- Hybrid particle substrate
- 1 to 10 pH range
- 10,000 psi (690 Bar) maximum pressure
- Endcapped
- Low silanol activity
- Spherical particle shape
- 1.7 μm particle size
- 130 Å pore size
- Peptide QC tested
- Nano/Micro system compatibility
- CSH particle technology
- L1 USP classification
- 150 μm inner diameter
- 50 mm length
- 15% carbon load
- 1 unit per package
YMC America, Inc C8-HG col 200A 20um 250x30mm
YMC-Pack C8 columns are prepared using exhaustive bonding of a monomeric octylsilane to totally porous and spherical silica gels The functionalized silica is then treated with an endcapping process which produces a moderate 10% carbon loading on the standard 120 pore material Available in three pore sizes YMC-Pack C8 columns will separate many classes of compounds including pharmaceuticals organic chemicals and biologics
Waters Corp Waters Column, CSH Fluoro-Phenyl, 130Å, 2.5 μm, 2.1 mm x 50 mm
The XSelect CSH Fluoro-Phenyl column maximizes selectivity, offering method development freedom, especially with low pH mobile phases. Its non-encapped sorbent enhances retention of acidic compounds. These 2.5 μm XP columns, packed in ultra-low dispersion hardware, enable exceptional separation, robustness, and throughput for HPLC assays, providing a transition to UPLC. All column documents are available online, reducing paper waste.
- Maximizes selectivity; method development freedom for low pH mobile phases.
- Non-encapped sorbent enhances retention of acidic compounds.
- 2.5 μm XP columns for exceptional performance.
- Ultra-low dispersion hardware for superior separation.
- Exceptional separation, robustness, and throughput for HPLC assays.
- Transition to UPLC adoption.
- Online documents for easy access and reduced waste.